Chat With Us + 971 50 7749157
Fluke Infrared Food Thermometer, FP
Key features
- Highly accurate non-contact infrared thermometer that instantly measures surface temperatures of food products
- Allows taking rapid and frequent non-contact temperature measurements without risk of cross-contamination
- Measures temperatures from -35 to 275°C
- Features HACCP check lights for instant recognition of safe/unsafe temperatures
DATASHEET
Hurry Up! Sold: 100/0 products in stock.
| Infrared Specifications | ||
| Temperature | -30°C to 200°C | |
| Accuracy | (Assumes ambient operating temperature of 23°C ±2°) | |
| Between 0°C and 65°C: ±1°C | ||
| Below 0°C: ±1° ±0.1 degree/degree | ||
| Above 65°C: ±1.5% of reading | ||
| Response time | < 500 ms after initial reading | |
| Spectral response | 8-14 microns | |
| Emissivity | Pre-set for foodservice applications | |
| Distance to spot size/Optical Resolution (D:S) | 2.5:1 @ 90% energy, typical | |
| Typical working range (target illumination) | ≈25 mm to 250 mm | |
| Minimum target size | 12 mm ø | |
| Illumination to IR channel offset | 13 mm | |
| Operational Specifications | ||
| Repeatability | Within accuracy specifications of the unit | |
| Ambient operating range | 0°C to 50°C | |
| Relative humidity | 90% (±5%) RH non condensing @ 30°C | |
| Storage temperature | -20°C to 60°C | |
| Weight | 100 g (with battery) | |
| Dimensions | 150 x 30 x50 mm | |
| Power, battery life | 1 AA alkaline | |
| Battery Life | Alkaline, 10 hours minimum @ 23°C | |
| Target illumination | High brightness LED | |
| Display resolution | 4 digits, 0.2°C | |
| Displayhold (7seconds) | Yes | |
| LCD backlit display | No | |
| Temperature display | 4 digits, 0.2°C resolution | |
| Maximum temperature displayed | No | |
| Timer | No | |
| Environmental data | IP54 sealing (hand-washable, non-submersible) | |
| Other Specifications | ||
| Standards | Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) | |
| Certifications | CE NSF | |
| Warranty | 2 years | |
| Infrared Specifications | ||
| Temperature | -30°C to 200°C | |
| Accuracy | (Assumes ambient operating temperature of 23°C ±2°) | |
| Between 0°C and 65°C: ±1°C | ||
| Below 0°C: ±1° ±0.1 degree/degree | ||
| Above 65°C: ±1.5% of reading | ||
| Response time | < 500 ms after initial reading | |
| Spectral response | 8-14 microns | |
| Emissivity | Pre-set for foodservice applications | |
| Distance to spot size/Optical Resolution (D:S) | 2.5:1 @ 90% energy, typical | |
| Typical working range (target illumination) | ≈25 mm to 250 mm | |
| Minimum target size | 12 mm ø | |
| Illumination to IR channel offset | 13 mm | |
| Operational Specifications | ||
| Repeatability | Within accuracy specifications of the unit | |
| Ambient operating range | 0°C to 50°C | |
| Relative humidity | 90% (±5%) RH non condensing @ 30°C | |
| Storage temperature | -20°C to 60°C | |
| Weight | 100 g (with battery) | |
| Dimensions | 150 x 30 x50 mm | |
| Power, battery life | 1 AA alkaline | |
| Battery Life | Alkaline, 10 hours minimum @ 23°C | |
| Target illumination | High brightness LED | |
| Display resolution | 4 digits, 0.2°C | |
| Displayhold (7seconds) | Yes | |
| LCD backlit display | No | |
| Temperature display | 4 digits, 0.2°C resolution | |
| Maximum temperature displayed | No | |
| Timer | No | |
| Environmental data | IP54 sealing (hand-washable, non-submersible) | |
| Other Specifications | ||
| Standards | Conforms to EN 61236-1 Electromagnetic Emissions and Susceptibility, EN 6101-1 General Safety, Sealing IP54 (hand washable, non-submersible) | |
| Certifications | CE NSF | |
| Warranty | 2 years | |
| At calibration geometry of 279 mm with a 140 mm diameter, 0.97 emissivity blackbody. Specifications subject to change without notice. | ||
Write Your Own Review